0
Your Cart
empty cart Your cart is currently empty! Return to Shop

Dial Customer Care
+977-9801402897

Help & Support • Knowledge Base

Frequently Asked Questions

Everything you need to know about Sewaro Ply products, certifications, technical specifications, bulk orders, and nationwide delivery.

Sewaro Ply is a Nepali plywood brand, manufactured at our ISO-certified factory in Birtamode, Jhapa. We make quality plywood for furniture, interiors, doors, partitions, and construction, with a focus on consistent thickness, strong bonding, and a smooth finish.

Yes. Our plywood is manufactured to the IS 303:1989 standard and carries the official ISI mark (Licence No. CM/L-4100324772). Furthermore, our manufacturing unit is certified to ISO 9001:2015 for quality management and ISO 14001:2015 for environmental management.

Sewaro Ply is proudly manufactured by Pathivara Veneer & Plywood Industries at our dedicated manufacturing facility located in Birtamode-2, Jhapa.

We operate directly through two primary locations:

  • Manufacturing Facility: Pathivara Veneer & Plywood Industries in Birtamode-2, Jhapa • Phone: +977 9801109301
  • Kathmandu Branch: Pathivara Ply Trading in Satungal, Kathmandu • Phone: +977 9852681595

We produce and supply high-performance Commercial Plywood (MR Grade) and Waterproof Plywood (BWP Grade), along with specialized decorative and shuttering panels across multiple dimensions. Contact us directly for the full catalogue and real-time inventory.

Our plywood sheets are manufactured in calibrated thicknesses ranging from 4 mm up to 19 mm in standard dimensions such as 8 ft × 4 ft. Customized thicknesses and sizes can also be coordinated for major industrial or architectural orders.

For standard dry applications such as beds, wardrobes, study desks, and living room tables, good-quality Commercial MR Grade plywood works exceptionally well.

For modular kitchens, under-sink cabinets, bathroom vanities, and moisture-exposed zones, we strictly recommend Waterproof (BWP – Boiling Water Proof) plywood to withstand humidity without delamination.

Commercial Plywood (MR) is engineered for dry indoor environments (bedrooms, living areas, false ceilings, partitions) using moisture-resistant bonding resins.

Waterproof Plywood (BWP) uses synthetic phenolic resins cured under high heat and hydraulic pressure, enabling the wood core to withstand prolonged boiling water immersion and extreme monsoon dampness.

To inspect plywood quality on-site, keep these checkpoints in mind:

  • Even Flatness: Ensure the sheet is completely planar without bending or corner dipping.
  • Edge Inspection: Check the cut edges for tight, gapless, uniform core veneer layers without hollow air pockets.
  • Surface Smoothness: A properly calibrated board will have a silky, defect-free surface without cracks, core telegraphing, or loose veneer patches.
  • Certification Seals: Check for recognized quality hallmarks like the ISI mark (IS 303:1989) stamped clearly on the sheet face.

Yes. We work extensively with homeowners, master carpenters, interior contractors, building developers, and hardware dealers. For bulk requirements, share your sheet count, grade, and thickness specs, and our dispatch team will provide a competitive volume quotation.

We deliver all over Nepal. Whether your project site is in the Koshi Province, Kathmandu Valley, Pokhara, Chitwan, or western hubs, our logistics network can arrange transit. Delivery charges depend on freight volume and destination location; simply provide your delivery pin when inquiring.

Because raw timber and resin costs fluctuate with the broader market, we provide accurate rates on request:

To preserve structural warranty and dimensional balance:

  • Store boards horizontally flat on wooden battens, elevated at least 4–6 inches off bare ground.
  • Keep stored sheets completely protected from rainfall, standing moisture, and direct prolonged sunlight in a well-ventilated warehouse.
  • After cutting and carpentry assembly, thoroughly seal all raw edges and surfaces with primer, varnish, or laminate edge-banding.

Yes, we welcome authorized dealer and distributor inquiries across all provinces of Nepal.

Contact our corporate desk with your business registration name, physical hardware retail store address, and estimated monthly off-take volume. Our sales director will coordinate dealer terms and sample boards.

No matching questions found

Try searching with another keyword or connect with our customer service team directly.

Still Have Questions?

Speak directly with our factory experts or request a prompt price quotation for your build.

Enquire Now

Instant help: +977-9801402897